Cliff, like many of us, has always loved home theater equipment. In high school he landed a job at Best Buy that started his path towards actual high quality audio. His first surround sound was a Klipsch 5.1 system. After that he was hooked, moving from Klipsch to Polk to Definitive Technology, and so on.
It is not an ideal setup, but if you need it to work without getting a new receiver or subwoofer it might be the only way. So you would be looking for a 16/2 or 14/2 speaker wire which means 16-guage/2-conductor or 14-guage/2-conductor which you can find for around $0.10 to $1.00 per foot. I am having trouble hooking up my stereo system, I have 4 pieces of equipment.
Pros of using an AUX cable
Connect the speaker wires from the terminals on the receiver to the inputs on the back of the speakers . Hookup no problem, Love the usb for music from my PC. Reception from the FM radio is better than my past Panasonic and Sony in dash receivers. Highly recommend this as a little cheaper choice.
Tips for Hooking Up Speakers
If you want to manually double check everything, however, you can do so with an SPL meter. An SPL meter is used to measure how loud a sound is and can be purchased from radio shack for about $50. You simply point the SPL meter up at the ceiling, ear height, at the primary listening position and set it to “C-weighted” and “slow response”. If all of your equipment supports HDMI, connection should be a breeze.
Use USB – some stereos have a USB input that you can connect your iPhone to with the charging cables. Yes, this article needs to show how to hook up a turntable to a stereo system. I plan to update this in the next few weeks with more instructions and pictures for adding equipment like a turntable. This isn’t an end-all, be-all list of requirements.
You may also notice a “phase” switch or dial, along with “gain/volume” and “low pass filter”. For now, don’t touch the phase adjustment, put the gain/volume a little under 1/2, and turn up the low pass filter all the way or set it to “disable” or “off”. Unless you’re hooking up a PA system, the primary connector you’re likely to need when connecting up your speakers is the banana plug, shown above on the right.
You need to connect the turntable here because it needs extra amplification compared to the CD and VHS players. Otherwise, you will barely be able to hear the turntable. I looked at the connections on the back of a Technics SA-GX100 receiver and see that the Tape and VCR inputs also have outputs to record with.
The speaker cables consist of one wire with a RCA type plug low frequency and one bare end wire for high frequency. I have been given the opportunity to rebuild a system with the hope that I can purchase it once its up and running. I have no wires or cables at this time so I think you can save me some time and money through my own trial and error. I have a dual JVC cassette deck and an ONKYO receiver.
Blu-ray – One HDMI cable goes from the Blu-ray player to an HDMI input on the receiver. One jack of the pair is probably red or labeled “Right” — push the cord’s red plug into that jack. The other jack is probably black, white, or green — this jack is for your other plug, no matter what color it is.
The 15 Best Hookup Apps for Getting Straight to Business
Connect RCA cables to the analog audio output of the TV. The most basic option for improving TV listening is to connect a TV’s analog stereo outputs to an available external audio system. With the arrival of 4K and UHD technology, TV picture quality improved dramatically, but equally important to any home entertainment system is the sound altscene.com customer support quality. In this article, we explain five ways to connect a TV—including most made by LG, Samsung, Panasonic, Sony, and Vizio—to an external audio system. There’s no reason not to make your current wired speakers wireless—there are expensive, high-end options, of course, but the basic route can be done for a low price and little effort.